Sanderson Associates offer a full range of Highway Detailed Design Services from the design of a simple vehicle access for one dwelling to signalised junctions and re-routing of primary dual carriageways through City centres to serve major developments. Our Clients range from private individuals through to all members of the Private Sector and a variety of Public Bodies.
The level of services we offer range from the provision of preliminary design advice, through the detailed design process to the preparation of construction drawings, construction documents, tender processes (including tender appraisal), pre- start meetings, project management, works on site supervision, agreeing final accounts, certificates of completion and the preparation of as built drawings.
Where there are on site highway works or, if the initial planning application's Transport Assessment has identified the need for off site highway improvements (or during the negotiation period these become a requirement of the Local Planning or Highway Authority), it is usual for us to examine these in enough detail to be able to advise our Clients on the likely cost implications and deliverability of the works. This is important not only for budget costs, which may impact on the viability of the project, but also if additional third party land is found to be needed through a requirement of the Authority which may seriously effect the delivery of the works or the overall project.
The design process is always carried out with close consultation with the Local Highway Authority to ensure that the designs are compliant with current design standards and are to the satisfaction of the appropriate body. The design standards normally used are drawn from the ‘Design Manual for Roads and Bridges’ (DMRB), Manual for Streets, Manual for Streets 2: Wider Application of the Principles and local guides as adapted by the Local Highway Authority. Close liaison can also be provided if required with the appointed contractors when works are under construction.
The level of detail required in the design of a scheme will depend on the scope and complexity of the project. Detailed design drawings at 1:500/1:200 scale are typically provided and the following is a list of the most common drawings normally required. The list is by no means exhaustive and additional drawings are quite often necessary dependant on the Local Authority and works being undertaken:
- General Arrangement
- Site Clearance
- Drainage Layout
- Carriageway and footway construction details
- Kerbing, edging and channel details
- Traffic signs and road markings
- Landscaping proposals
- Street Lighting
- Cross and Longitudinal Sections
- Setting out details
- Standard construction details
- Utility Company Apparatus
Sanderson Associates use the latest design tools and applications in the detailed design process including:
- AutoCAD computer aided design software to produce the detailed design drawings
- Key TERRA-FIRMA and PDS ground modelling software to prepare the horizontal and vertical design
- AutoTrack for checking various vehicle swept paths for the proposed horizontal design
- KeySIGNAL for the design of new traffic signal schemes
- KeyLINES for the design of new road marking schemes
- KeySIGN for the design of new traffic signs
- KeyPOST for the design of new sign posts
When a development requires alterations or improvements to an existing public highway, for the works to be implemented the developer must first enter into an appropriate form of agreement with the Highway Authority. These agreements are contained within the Highways Act 1980.
Sanderson Associates have the experience and expertise to guide a developer through this process and coordinate with the Highway Authority on their behalf. The most common agreements required for the completion of highway works are briefly explained below:
Section 278 Agreement - This agreement is appropriate when a development requires alterations to be made to the existing public highway and may require the developer to dedicate some of the development land as new public highway as part of the works. Examples of such works could be the construction of a new access/junction or improvements such as a new roundabout, additional traffic lanes etc to an existing access/junction.
Section 38 Agreement - This agreement is appropriate where new residential or industrial estate roads are to be constructed to adoptable standards and in the future are to be maintained by the Highway Authority as adopted public highway.
Section 184 Agreement - Primarily this agreement is for the formation of vehicle crossings over footways and verges for single dwellings or shared private drives. However, it is also common for Highway Authorities to use this agreement where a developer intends to construct or alter any site access or accesses where these are the only highway works required to serve the development. Examples of this would be improved bell mouth junctions or new heavy duty industrial types of access.
(Note – this agreement may not be necessary if the works are included within a Section 38 Agreement).
Section 50 License - Unless covered by any of the above agreements, excavations in the public highway for the purposes of laying new apparatus, connections to existing services, advance trial holes etc require the issue of a license by the Highway Authority under Section 50 of the New Roads and Street Works Act 1991.
Where required, we will prepare contract documents and can tender works on behalf of Clients. This includes preparation of highway contracts in accordance with the ‘NEC3 Engineering and Construction Contract’ suite of documents and the preparation of Specifications and Bill of Quantities in accordance with the ‘Manual of Contract Documents for Highway Works’ (MCDHW) or as amended by the Local Highway Authority.
Project Management and Supervision
We regularly provide project management and supervision roles on a variety of highway schemes. This includes managing the contractor on site and coordinating with the Client to ensure that the implementation of the highway works is completed as smoothly as possible and that the Client’s deadlines are achieved.
What Our Clients Say:
Swept Path Analysis and Visibility Drawing incorporated into a Technical Note, Proposed Residential Dwelling, Colchester.
Highway Statement, Proposed Residential Development, Stockport
Transport Assessment, Proposed Residential Development (170 dwellings), Essex
Speed Survey, Proposed Private Residential Development – Testimonial
Access Feasibility Study, Proposed Private Residential Development – Testimonial
Analysis of Speed Survey and Swept Path Analysis
Stage 2 Road Safety Audit, Residential, Staffordshire
Construction Traffic Management Plan
Flood Risk Assessment, Testimonial, Industrial Development, Sheffield
Require Assistance with Detailed Design?
Sanderson Associates have enjoyed over 36 years in business, our experienced Highway Detailed Design Engineers have produced designs for a variety of developments throughout the UK, Isle of Man and Ireland.
We would be pleased to provide you with our competitive fee proposal to provide you with our Detailed Design Services, please call us on 01924 844080 or click here to complete our secure online form.